The controlling system PORTOS-R works on the frequency of 433 MHz. The transmitters of this controlling system enable the controlling of any drive in the radio version of PORTOS-R series or any external radio receivers existing in this system. The offer comprises wireless wall switches with a timer function, manual control, as well as multi-channel remote controls.
1-channel remote
1 individual channel, possibility of programming up to 20 motors per channel.
5-channel remote
5 individual channel, possibility of programming up to 20 motors per channel, 1 common channel.
15-channel remote
15 individual channels, possibility of programming up to 20 motors per channel, 1 common channel.
5-channel remote with timer
5 individual channels, 1 common channel, possibility of programming up to 20 motors per channel, possibility to set a separate timer on each channel, 2 modes of work-manual, auto, random.
1-channel remote control
PS-1
Electronic switch,
individual switch, support/non-support mode.
PS-2
Electronic switch for two motors,
switch for two motors, support/non-support mode.
PRN-1
1-channel wall mounted remote
possibility of programming up to 20 motors per channel.
PRN-2
2-channel wall mounted remote
2 individual channels, possibility of programming up to 20 motors per channel.
PRN-15
15-channel wall mounted remote
15 individual channels, possibility of programming up to 20 motors per channel, 1 common channel.
PRN-5T
5-channel wall mounted remote with timer
5 individual channels, possibility of programming up to 20 motors per channel, possibilyty to set a separate timer on each channel, 3 modes of work - manual, auto, random, lock function.
PS-1T
Electronic switch with timer,
individual switch, possibility to set the timer functions for one motor, support/non-support mode.
PE1
Electronic switch,
individual switch, support/non-support mode.
PE2
Electronic switch,
individual switch, support/non-support mode.
PEN1
1-channel wall mounted remote
possibility of programming up to 20 motors per channel.
PEN2
2-channel wall mounted remote
possibility of programming up to 20 motors per channel.
PPKL-303
Electronic switch with built-in receiver,
individual switch, possibility to program any remote onto the reciver, support/non-support mode.
PPKL-304
Flush-mounted key switch. After pressing, it is held in "on" position.
PNKL-305
Surface mounted key switch. After pressing it is held in "on" position.
PNKL-306
Surface mounted key switch. In "on" position it has to be pressed constantly.
PPKR-313
Wall-mounted switch with a radio receiver.
PPKR-313/2
Double electronic switch with a built-in radio receiver.
PPKR-400
Wall-mounted switch with a radio receiver.
PPKL-300
Flush-mounted key switch for cooperation with the controller.
PNKL-300
Surface mounted key switch for cooperation with the controller.
PPK-307
Flush-mounted key switch.
PNKL-309
Surface mounted key switch.
SIR
Flush-mounted roller blind controller. It enables control individually with one drive and makes it possible to connect one central breaker.
XT-R
Flush-mounted radio receiver. It is used to control the cable motor. It has a possibility to connect a key switch (without maintenance) and an embedded radio receiver.
PMX1
Bell button.
PBX2
Flush-mounted switch.
PMX2
Flush-mounted button.
PBX2N
Surface-mounted switch.
PMX2N
Surface-mounted button.
PKLX2N
Surface-mounted key switch.
PKLX2
Flush-mounted key switch.
1-channel remote control
15-channel remote control
5-channel remote control
SPRN-1+
wall-mounted
1-channel transmitter
for S-SOLAR solar drives
SRR-5T+
5-channel transmitter
with a timer for S-SOLAR solar drives
SRR-15+
15-channel transmitter for S-SOLAR solar drives