Top mounted shutters that can also be called roller shutters are installed only at the construction stage of the facility or during the replacement of window woodwork in the already existing facilities. The box of roller blinds in this case is applied on the frame of windows or doors. Guide rails are screwed to the external part of the window frame, and only later is the whole set installed in the window recess. The box of the shutters is eventually invisible, and shutters seem to be parts of the windows. The manufacturer of shutters, PORTOS Sp.J. offers you:
MX1200 is a system of roller shutters dedicated for renovation and monoblock windows. The specific construction of the shutter box with an inspection hatch at the front allows for mounting a roller shutter on the window frames of 60 to 180mm. The rounded bottom edge of the inspection hatch and the ability to use end caps on the access cover and the box sides increase the aesthetics significantly. The operation is possible both manual using a tape and electric using a switch or a remote control.
TL1000 is one of the better shutter systems that can be used in newly-built facilities and those being modernized. The access cover is installed on the bottom of the box - it also allows the possibility of building up the box of shutters from the inside of the apartment without concern about the service access to the shutters. They can be installed to windows whose frame’s max. thickness does not exceed 95 mm. TL1000 shutters have no version with a mosquito net.
CC1000 – a basic system of overhead shutters. The access cover is installed on the front of the box. They can be installed to windows whose frame’s max. thickness does not exceed 95 mm. There is no version with a mosquito net. CC1000 shutters are an ideal solution for industrial facilities.
TP1000K is a system that can be installed on broad window frames, even up to 188 mm (with a broadening up to 250 mm). Using an expanding element we increase the depth of the box by 31 mm or 62 mm. This system has the capability of creating a revision cover from the bottom (with an installation box from the inside), or the front (during the installation on a wide window frame). The possible service is both manual - with the use of a belt - and electric - with the use of a switch or a remote control. The version with a mosquito net protects the room effectively against the access of insects, as well as any kinds of pollen, leaves and dirt. At the same time it does not limit access to air and daylight.
TP1000K is a system that can be installed on wide window frames, even up to 202 mm (with broadening to 264 mm). Using an expanding element we increase the depth of the box by 31 mm or 62 mm. This system has the capability of creating a revision cover from the bottom (with a build-up box from the inside), or the front (during the installation on a wide window frame). The possible service is both manual - with the use of a belt - and electric - with the use of a switch or a remote control. It has two-chamber load carrying walls that provide better thermal insulation and their high stiffness makes it impossible to bend the box during the installation.
Owing to wide installation possibilities, it perfectly fits modern house designs. The option with internal inspection cover, external inspection cover, as well as a box prepared for installation of the external blind are additional arguments for choosing SN5000®. Thanks to specially designed guides, the external blind package with a slat width of up to 90 mm can be easily attached. The SN5000® roller shutter is optionally available with a mosquito net, which is a system solution creating a coherent whole and providing the comfort of using top-mounted roller shutters. Owing to its unique possibilities and varieties the SN5000® roller shutter can be used both in the Polish and foreign markets.